DOWNLOAD
WITHOUT PASSWORD
Showing posts with label tested. Show all posts
Showing posts with label tested. Show all posts
Sunday, October 16, 2016
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano Tested On SPD 6531
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano Tested On SPD 6531
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)
Requirement
(1)usb cable NOKIA 5130
(2)any RJ45 Cable
(3)Iron
(4)Solding Wire
first remove usb jig FROM USB CABLE and sold with any rj45 cable All five wire .volcano box will detect auto pin D+ D-
MAKE THIS TYPE EASY CABLE OTHER JIGS AND TEST IT WITH VOLCANO BOX AND SHEAR HERE YOUR EXPERIENCE
VIDEO LINK
Easy Cable RJ45 To USB converter For Volcano - Download - 4shared
http://www.4shared.com/rar/BC2UC61N/...B_convert.html
rj45 tx rx find to easy .
but rj45 usb D+ D- how to do
pls clear which rj45 8pin use usb 5 pin.
Go to link download
Thursday, October 13, 2016
Hacktivate Bypass iphone 4 ios7 remove icloud tested 100 Realy Working tested
Hacktivate Bypass iphone 4 ios7 remove icloud tested 100 Realy Working tested
Hacktivate & Bypass iphone 4 ios7 remove icloud tested 100% 
1) iPhone4_Hacktivate_Tool.exe
2) Open iPhone4_Hacktivate_Tool 3) Put your iphone4 into DFU mode
4) Press Button 1 to run the ssh_rd tool
5) Wait until ssh_rd tool is done
6) Run number 2 to mount your devices filesystem
7) Now run number 3 to copy the needed files over to hacktivate your iphone 4
8) Your device will reboot and go into restore mode
9) Press the exit recovery button
100% Done!!!
Readmore>>>Hacktivate & Bypass iphone 4 ios7 remove icloud tested 100%
Go to link download
Sunday, September 18, 2016
Phone Repair 1202 1203 1661 5030 NEW audio saloution 100 tested
Phone Repair 1202 1203 1661 5030 NEW audio saloution 100 tested
Source : http://mobilephonerepair.f1v.net/?p=1874
Go to link download
Saturday, September 10, 2016
Galaxy Mega I9200 After update touch not working Solution Here Tested
Galaxy Mega I9200 After update touch not working Solution Here Tested
Galaxy Mega I9200 After update touch not working Solution Here Tested
Guide: MySelf
This Solution Tested & Done By : allumts
Note: This file Only fix Bootloop issues Always Booting in
recovery mode, after update to 4.4.2 hang Logo
Only recovery mode & Touch not working after update to kitkat.
Tested Downgrade from 4.4.2 to 4.2.2 Tested vit out any issues
Firmware Flashing Method:
* Put Mobile in Download Mode By Holding Vol dwn + Home + Pwr
* Cnnt vit pc using Usb
* Run Odin
* Select File in PDA
* Uncheck Auto Boot in Odin (Important This Step )
* Click Start
* After Flash complete remain with Blu line, but not import after PASS only Important.
* Just take out battery, wait 30 sec.s and
put back the battery power on phone,
itself goes in Recovery mode, or manually put recovery mode just
select Wipe/Factory reset and reboot, all working fine.
Note:Tested nd Worked Fine nd IMEI also fine
Firmware Download Here Android 4.2.2
Mirror Link Here Login vit sammobile Acc
Odin Flasher
Note:if all language not available aftr flash simply root yur device install language enabler frm here nd enable all languages reboot device
Also yu can install all language manually via wifi Goto settings /Language input
CSC flashable Language Pack vil be added Soon
Result Credits to : allumts
Odin flash Log
: Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Plse wait..
I9200ZTUCNG1_I9200ZZTCNG1_I9200ZTUCNG1_HOME.tar.md 5 is valid.
Checking MD5 finished Sucessfully..
Lve CS..
Odin v.3 engine (ID:18)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
tz.mbn
boot.img
recovery.img
system.img.ext4
NON-HLOS.bin
cache.img.ext4
hidden.img.ext4
RQT_CLOSE !!
RES OK !!
Remain Port .... 0
All thrds completed. (succeed 1 / failed 0)
DONT SAY THANKSJUST PRESS BUTTON
BUTTON
Go to link download
Thursday, September 8, 2016
Symphony D130 MTK 6250 Flash File tested
Symphony D130 MTK 6250 Flash File tested
Symphony D130 (MTK-6250)
Info : 01
WBG1309SY_0201_PCB01_GPRS_MT6250_S00.1309SY_0201_V 0656.BIN
Project ID : 1309SY_0201_V0656
CPU_ID : MT625A
Flash Size : 0x100000(16MB)
Password : Ashfaq Tawhid Raya
Info : 01
WBG1309SY_0201_PCB01_GPRS_MT6250_S00.1309SY_0201_V 0656.BIN
Project ID : 1309SY_0201_V0656
CPU_ID : MT625A
Flash Size : 0x100000(16MB)
Password : Ashfaq Tawhid Raya
Symphony D130
Go to link download
Wednesday, September 7, 2016
Symphony W50 Rooting Tested
Symphony W50 Rooting Tested
Hi Guys !
Im here with a tutorial for Rooting Symphony W50
Which many of you Guys Requested !
OK ! First things First !
Im Not Responsible For any damage of your phone !
Lets Start -
1.Backup UR data and ROM !
- If you wanna keep all the app you currently have in your phone because all your Contacts , Massages , Apps will be removed during the process
If you wanna make a backup of those APP thn you might try some APPS to make a Backup of those files here are the name -
a) File Expert
b) Android Assistant
2.Rooting Process -
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
e) Now Download this Zip file https://www.dropbox.com/s/3hqk9uymdn..._v2.1121.01.7z
f) After Downloading Extract it to your Desktop !
g) Now go to Sp_Flash tool folder and run Flash_tool as administrator
h) After the program loads click on the Scatter-loading and theres and scatter file inside the SP_Flash tool folder go to SP_Flash_Tool_exe_v2.1121.01SP_Flash_Tool_exe_v2. 1121.01Android and select the Scatter file
i)Now tick the recovery and press on it Now find the CWM file that is in the zip file ....
j) Now turn of ur device
k) Now this is important SO Be careful .....
Click the download button on SP_FLASH_TOOL and a timer starts So connect the phone between 12 sec ( and make sure ur phone is off ) and the process bar will complete and and it will show you a green mark that means it worked ! 
I have included a video of how to Work with the SP_Flash tool
here is the videos ! https://www.youtube.com/watch?v=1Y1LuRu0NRA
In case u r having trouble with Youtube !
Now open Your phone while Holding the Power Button + Volume UP and a screen appear As Clockwork-mod 5........
the screen will look like this
Now make sure to make a backup of your current ROM ! Which is easy
in the Clockwork-mod menu use the Volume keys as up and down and and the Option button as OK ! So navigate to the BACKUP AND RESTORE Option ! and select backup as shown below
and here are the button config cause ur screen will not work around here
and how to make the backup
it might take a while !
And after the backup finishes .... and show successful Disconnect the cable and power off the device .....
Now remove the SD card and Connect it to your Computer and Go to SD/Clockworkmod/ and cut the Backup folder and keep it safely on your PC !
Now Download this File clockworkmod.rar
Extract it .... And Copy the backup folder to Clockworkmod/ and put the SD in your phone,
Now again start your phone by pressing And Holding The Power Button + The Volume UP key until the Clockworkmod interface comes and now go to the Wipe data/factory setting and select Yes after that do wipe cache partition now go to Backup again and press restore and select the 2012-06-10.08.17.26 and next screen press the YES Option .. wait until it finishes and reboot the device Confused ? See screenshots below !
After Wiping Data and cache partion do this
and now selcet the 2012-06-10.08.17.26
Select yes and wait for it to be done !
Now start up the device and if it boots up fine then Congrats ! ( usually takes more time in the start time start-up )
Now download this file http://downloads.noshufou.netdna-cdn...arm-signed.zip and copy it to the SD card
Now power off your phone and go to Clockworkmod again and select install zip from SD and again select Install from SD and browse and select the Superuser.zip u have just downloaded and press OK ... again select YES and wait for it to finish and restart your phone and you will find the superuser app in the Application menu !!! here are the screen shots ! -
Install Zip from SD
Press Install Zip from SD again
and Locate the Superuser.zip u just copied to your SD
and wait for it to be finished 
Im here with a tutorial for Rooting Symphony W50
Which many of you Guys Requested !
OK ! First things First !
Im Not Responsible For any damage of your phone !
Lets Start -
1.Backup UR data and ROM !
- If you wanna keep all the app you currently have in your phone because all your Contacts , Massages , Apps will be removed during the process
If you wanna make a backup of those APP thn you might try some APPS to make a Backup of those files here are the name -
a) File Expert
b) Android Assistant
2.Rooting Process -
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
e) Now Download this Zip file https://www.dropbox.com/s/3hqk9uymdn..._v2.1121.01.7z
f) After Downloading Extract it to your Desktop !
g) Now go to Sp_Flash tool folder and run Flash_tool as administrator
h) After the program loads click on the Scatter-loading and theres and scatter file inside the SP_Flash tool folder go to SP_Flash_Tool_exe_v2.1121.01SP_Flash_Tool_exe_v2. 1121.01Android and select the Scatter file
i)Now tick the recovery and press on it Now find the CWM file that is in the zip file ....
j) Now turn of ur device
k) Now this is important SO Be careful .....
Click the download button on SP_FLASH_TOOL and a timer starts So connect the phone between 12 sec ( and make sure ur phone is off ) and the process bar will complete and and it will show you a green mark that means it worked !
I have included a video of how to Work with the SP_Flash tool
here is the videos ! https://www.youtube.com/watch?v=1Y1LuRu0NRA
In case u r having trouble with Youtube !
Now open Your phone while Holding the Power Button + Volume UP and a screen appear As Clockwork-mod 5........
the screen will look like this
Now make sure to make a backup of your current ROM ! Which is easy
in the Clockwork-mod menu use the Volume keys as up and down and and the Option button as OK ! So navigate to the BACKUP AND RESTORE Option ! and select backup as shown below
and here are the button config cause ur screen will not work around here
and how to make the backup
it might take a while !
And after the backup finishes .... and show successful Disconnect the cable and power off the device .....
Now remove the SD card and Connect it to your Computer and Go to SD/Clockworkmod/ and cut the Backup folder and keep it safely on your PC !
Now Download this File clockworkmod.rar
Extract it .... And Copy the backup folder to Clockworkmod/ and put the SD in your phone,
Now again start your phone by pressing And Holding The Power Button + The Volume UP key until the Clockworkmod interface comes and now go to the Wipe data/factory setting and select Yes after that do wipe cache partition now go to Backup again and press restore and select the 2012-06-10.08.17.26 and next screen press the YES Option .. wait until it finishes and reboot the device Confused ? See screenshots below !
After Wiping Data and cache partion do this
and now selcet the 2012-06-10.08.17.26
Select yes and wait for it to be done !
Now start up the device and if it boots up fine then Congrats ! ( usually takes more time in the start time start-up )
Now download this file http://downloads.noshufou.netdna-cdn...arm-signed.zip and copy it to the SD card
Now power off your phone and go to Clockworkmod again and select install zip from SD and again select Install from SD and browse and select the Superuser.zip u have just downloaded and press OK ... again select YES and wait for it to finish and restart your phone and you will find the superuser app in the Application menu !!! here are the screen shots ! -
Install Zip from SD
Press Install Zip from SD again
and Locate the Superuser.zip u just copied to your SD
and wait for it to be finished
Go to link download
Wednesday, August 24, 2016
Mycell Alien SX2 Factory Firmware 100 tested Without Password
Mycell Alien SX2 Factory Firmware 100 tested Without Password
Mycell Alien SX2 Factory Firmware 100% tested
Without Password
Download Here
Go to link download
Thursday, August 18, 2016
GDL Xtreme 1 Flash File WITHOUT PASSWORD tested
GDL Xtreme 1 Flash File WITHOUT PASSWORD tested
GDL Xtreme-1 Flash File WITHOUT PASSWORD tested
DOWNLOAD
WITHOUT PASSWORD
Go to link download
Subscribe to:
Posts (Atom)