Showing posts with label easy. Show all posts
Showing posts with label easy. Show all posts
Sunday, October 16, 2016
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano Tested On SPD 6531
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano Tested On SPD 6531
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)
Requirement
(1)usb cable NOKIA 5130
(2)any RJ45 Cable
(3)Iron
(4)Solding Wire
first remove usb jig FROM USB CABLE and sold with any rj45 cable All five wire .volcano box will detect auto pin D+ D-
MAKE THIS TYPE EASY CABLE OTHER JIGS AND TEST IT WITH VOLCANO BOX AND SHEAR HERE YOUR EXPERIENCE
VIDEO LINK
Easy Cable RJ45 To USB converter For Volcano - Download - 4shared
http://www.4shared.com/rar/BC2UC61N/...B_convert.html
rj45 tx rx find to easy .
but rj45 usb D+ D- how to do
pls clear which rj45 8pin use usb 5 pin.
Go to link download
Sunday, September 11, 2016
Easy Work with Android modified Cable
Easy Work with Android modified Cable
Android modifide Cable
use this cable, no need press any boot key in any spd,mtk android and many other phones
insert this usb cable(switch off with battery) and see in device manager,your mobile is connected
1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND
JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE
joint this empty point to gnd in ca 101 nokia usb cable
how to use the cable for read write flash or write imei
read write flash
1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run
use this cable, no need press any boot key in any spd,mtk android and many other phones
insert this usb cable(switch off with battery) and see in device manager,your mobile is connected
1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND
JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE
joint this empty point to gnd in ca 101 nokia usb cable
how to use the cable for read write flash or write imei
read write flash
1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run
Go to link download
Subscribe to:
Posts (Atom)