Showing posts with label spd. Show all posts
Showing posts with label spd. Show all posts
Sunday, October 16, 2016
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano Tested On SPD 6531
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano Tested On SPD 6531
HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)
Requirement
(1)usb cable NOKIA 5130
(2)any RJ45 Cable
(3)Iron
(4)Solding Wire
first remove usb jig FROM USB CABLE and sold with any rj45 cable All five wire .volcano box will detect auto pin D+ D-
MAKE THIS TYPE EASY CABLE OTHER JIGS AND TEST IT WITH VOLCANO BOX AND SHEAR HERE YOUR EXPERIENCE
VIDEO LINK
Easy Cable RJ45 To USB converter For Volcano - Download - 4shared
http://www.4shared.com/rar/BC2UC61N/...B_convert.html
rj45 tx rx find to easy .
but rj45 usb D+ D- how to do
pls clear which rj45 8pin use usb 5 pin.
Go to link download
Saturday, October 1, 2016
Tutorial How to write IMEI in All SPD Phones having P 05b Connector
Tutorial How to write IMEI in All SPD Phones having P 05b Connector
How to write IMEI with VolcanoBox
in All SPD Phones having P-05b Connector
Before Repairing IMEI, User must follow these -
User must have Win Xp (Service Pack 3) for best results
Install Correct Drivers for your handset.
If you dont have correct driver, then download from below links -
SPD Android Usb Driver for win7/win8 (64bits)
SPD Android Usb Driver for winXP/win7 (32bits)
SC6530/6531/6610 New Usb Driver for win7/win8 (64bits)
SC6530/6531/6610 New Usb Driver for winXP/win7 (32bits)
Now Make These Settings -
* Go to Detect tab & Select [D+/D-]SPD/Anyka in Detect Type.
* Manually put pinouts (Pin2= D- Pin3= D+ Pin5= GND) as given below -
* After putting pins like this, Connect Handset on Volcano Main Cable.
* Attach Power cables also & Press "Set Pinout" button.
* After Pinouts Setting Complete, Remove Cable from Box Socket (Dont Remove Cables from Handset)
See in pic below -
Now do as stated here -
in All SPD Phones having P-05b Connector
Before Repairing IMEI, User must follow these -
User must have Win Xp (Service Pack 3) for best results
Install Correct Drivers for your handset.
If you dont have correct driver, then download from below links -
SPD Android Usb Driver for win7/win8 (64bits)
SPD Android Usb Driver for winXP/win7 (32bits)
SC6530/6531/6610 New Usb Driver for win7/win8 (64bits)
SC6530/6531/6610 New Usb Driver for winXP/win7 (32bits)
Now Make These Settings -
* Go to Detect tab & Select [D+/D-]SPD/Anyka in Detect Type.
* Manually put pinouts (Pin2= D- Pin3= D+ Pin5= GND) as given below -
* After putting pins like this, Connect Handset on Volcano Main Cable.
* Attach Power cables also & Press "Set Pinout" button.
* After Pinouts Setting Complete, Remove Cable from Box Socket (Dont Remove Cables from Handset)
See in pic below -
Now do as stated here -
Code:
Step 1 - Open Volcano tool and go to spd tab and (Enable IMEI Option)
Step 2 - Tick "Write IMEI" and Untick "Auto-detect pinouts"
Step 3 - Set R/W IMEI to "COM" and press RUN Button(New Tool will Open)
Step 4 - Select "USB" in ComP and Fill IMEI in boxes.
Step 5 - Press "Write IMEI" button
Step 6 - Now Connect the cable back to the BOX.
Step 7 - wait for 2-3 minutes..you see message "Write IMEI done".
Go to link download
Friday, September 2, 2016
SPD 6531 All Spd imei Write With New Magic Usb Cable
SPD 6531 All Spd imei Write With New Magic Usb Cable
HOW TO MAKE SPD IMEI WRITE Cable - only disconnect usb + supply (vcc) your cable is ready
Write imei usb disconnect usb + supply (vcc)
usb cable connect only D+ D- GND
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new window will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-insert usb cable in mobile without battery
11-click on write imei
12- then insert battery, no need press any boot key and wait 10 secnd
imei write successfully
Go to link download
Subscribe to:
Posts (Atom)