Fast Download: lite

Showing posts with label lite. Show all posts

Saturday, October 15, 2016

Motorola Firmwares For RSD LITE Tools

Go to link download

Cherry Mobile Flare Lite Stock rom firmware to unbrick your phone

Hi,

Yesterday I was able to make a ROM dump of Cherry Mobile Flare Lite. And here it is. It is ready for download. I was able to test it too in a dead Cherry Mobile Flare Lite yesterday. So I can assure that this firmware is fully working. You can download the file below.

You can fix the following issue in your phone:

1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware

"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Flare Lite Part 1

Firmware Here -->Cherry Mobile Flare Lite Part 2
Firmware Here -->Cherry Mobile Flare Lite Part 3
Firmware Here -->Cherry Mobile Flare Lite Part 4

VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"

Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.

Follow these steps:

Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)

"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps

Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.

5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.

"Hard reset your phone after flashing"

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Latest version of Flashtool

PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.

If you encounter Privacy Protection Password:

Open flash_tool.exe
Load the scatter file
Goto Format Tab
Click on Format except bootloader
Press Play/Start Icon
Then remove battery
Insert the battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
After done formatting proceed in Flashing.
Goto Download tab (I assume that you load the scatter file already)
Uncheck PRELOADER (this is very important)
Then remove battery
Insert Battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
Power ON the phone after flashing.
Restore your IMEI.

For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.

FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)

1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google)
2. In MTKDroidstool (I assume you launch the tool) -- Click in Root.
3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE.
5. Then look for the folder where you extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone.
8. After hard reset your baseband should be fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI.
10. To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone. VOILA! I hope the phone is fully working :)

I hope this tutorial help you. Please drop a comment if something is not clear to you.

Tested by:

ME - Flashing / Files
Kyveen Ching - Flashing / Files
gilas101 -- Privacy Protection Lock / Flashing / Files
Rabamzz -- Privacy Protection Lock / Flashing / Files

Go to link download

Myphone Rio Lite Stock Rom Firmware to unbrick your phone

Hi,

From now on I will only use the latest version of flashtool, to better understand my tutorial.

The tutorial that I am going to post today is for Myphone Agua Rio Lite. Use only the firmware for MyPhone Agua Rio Lite. I already tried this firmware. Just load the file and flash your phone. No need to change anything.

Firmware Here -->MyPhone Agua Rio Lite Part 2
Firmware Here --> MyPhone Agua Rio Lite Part 1 Mirror Devhost
Firmware Here --> MyPhone Agua Rio Lite Part 2 Mirror Devhost
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"

Installing Driver with AutoInstaller

Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)

"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing

1. Launch FlashTool

2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps

Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.

"Hard reset your phone after flashing"

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Latest version of Flashtool

Load the scatter file
Choose Format all + Download (Underneath Scatter-loading file)
Then Click Download and wait until it is done flashing

I hope this tutorial help you. Please drop a comment if something is not clear to you.

Tested by:
Me
Jim (Comment box)
Leonides Fernandez

Go to link download

Cherry Mobile Flare S3 Lite firmware stock rom to unbrick your phone

Hi all,

I recently uploaded the firmware or stock rom for Cherry Mobile Flare S3 Lite, credits to the maker of this file. To Cherry Mobile Flare S3 Lite FB Group thank you.

If you have any problem with your Cherry Mobile Flare S3 Lite you can join the FB Group for better assistance.

I have already tested the file and it is 100% rooted, the firmware is also pre-rooted with Kingroot installed.

UPDATE -- THE DOWNLOAD LINK IS FOR DTC GT5S FIRMWARE. ILL CHANGE THE LINK LATER.

UPDATE 2 -- UPDATED THE CORRECT LINK FOR THE FIRMWARE

"If you are having hard time to download at datafilehost make sure that you UNCHECK the "Download with Secured Download Manager"

TOOLS
ResearchDownload --> DOWNLOAD HERE
Firmware --> Cherry Mobile Flare S3 Lite Part 1
Firmware --> Cherry Mobile Flare S3 Lite Part 2

Firmware --> Cherry Mobile Flare S3 Lite Part 3

Firmware --> Cherry Mobile Flare S3 Lite Part 4

Firmware --> Cherry Mobile Flare S3 Lite Part 5

Driver -- > DOWNLOAD HERE

"Extract to your desired folders"

DOWNLOAD THE FILES, AND EXTRACT. INSTALL DRIVER.

I suggest to use Windows with 32bit system for driver compatibility.

TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file the .pac file.(first button in ResearchDownload). Pac file is the firmware that you downloaded.
3. Wait until the Pac file has been loaded, the Researchdownload may freeze its ok just wait for it to load the pac file.
4. Press the Play button to continue flashing.
When connecting your phone in the PC after you press the Play button in Research Download, press and hold either VOLUME UP or VOLUME DOWN, or you can press VOLUME UP and VOLUME DOWN simultaneously.

5. Just wait for it to show pass in ResearchDownload. Your phone will automatically reboot. And just wait for it. It may take 3 minutes to fully boot the system.

I hope this tutorial help you recover your phone :)

Go to link download

Hard Reset your Samsung Galaxy Fame Lite S6790 and remove password pattern lock and gmail account

Hey,

Let me write again a tutorial on a Samsung device. And this one is for Samsung Galaxy Fame Lite S6790.

Hard resetting / factory resetting your phone will solve the following issues:

1. If you forgot your pattern lock
2. If you forgot your gmail account
3. If you forgot your password
4. Apps that automatically force closing
5. Stuck in Samsung Logo (sometimes does not work if the firmware is totally damage)

NOTE: Performing hard reset will erase your data.

To hard reset:

1. Turn off your phone.
2. Press and Hold VOLUME UP + HOME Button + Power button. Keep pressing and holding until the phone power up, release only the power button when it power up and wait until you enter in Android System Recovery.

3. Select wipe data / factory reset. To navigate press the VOLUME ROCKER, to confirm your selection PRESS POWER Button
4. Reboot your phone.

Note:
If performing hard reset did not succeed, you need to wipe the cache first in the android system recovery before performing wipe / factory reset.

I hope this tutorial helps you.. If you have any question just drop a
comment.

Go to link download

Star Mobile Up Lite firmware stock rom to unbrick your phone

Hi,

I got a new firmware, this firmware is for Star Mobile Up Lite. I have already tried and tested this firmware and it is 100% tested :D

All pictures below are just an example.

You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up
7. Monkey Virus/Malware

"DOWNLOAD THESE FILES"
Firmware Here -->Star Mobile Up Lite Part 1
Firmware Here -->Star Mobile Up Lite Part 2
Firmware Here -->Star Mobile Up Lite Part 3
Firmware Here -->Star Mobile Up Lite Part 4

VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"

"You can also use 64bit version, just disable driver signing or driver signature before installing the driver."

Installing Driver with AutoInstaller

Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

1. This is the first time that you will connect your phone and it will search for the correct driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)

"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

3. After you load the file, FILL CUSTPACK, MOBILE_INFO, and other file if only available in the firmware. Ignore if not available. UNCHECK PRELOADER only (Never flash preloader), If you cannot proceed in flashing without PRELOADER include PRELOADER. Proceed at your own risk, press Press Download to Flash your Phone.

4. After you press Download Follow these steps

Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.

"Hard reset your phone after flashing"

Some workarounds:

If you encounter PMT_Changed error here is what you do:

In Latest version of Flashtool

PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
Try Firmware upgrade
Try different version of flashtool
Try to set Format All + Download
Or try Manual Format first then Download.

If you encounter Privacy Protection Password:

Open flash_tool.exe
Load the scatter file
Goto Format Tab
Click on Format except bootloader
Press Play/Start Icon
Then remove battery
Insert the battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
After done formatting proceed in Flashing.
Goto Download tab (I assume that you loaded the scatter file already)
Uncheck PRELOADER (this is very important)
Press Download
Then remove battery
Insert Battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
Power ON the phone after flashing.
Restore your IMEI.

For Invalid IMEI (Does not work in MT6571 SoC):

Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. Your phone must be rooted first.
Download MTKDroidsTool version 2.4.8 and version 2.5.3
Enable your USB debugging in Developer Option (you also need this in rooting your phone via PC)
Okay in your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
Still in Mtkdroidstool -- Click ROOT
In your phone -- A pop up dialogue will appear, just grant or allow it.
In your PC -- If root shell is granted/allowed, Click in IMEI/NVRAM tab. If it is grayed out this is the time when you open the MTKDroidsTool version 2.5.3.
Enter your original IMEI
Click Replace
Reboot your phone

FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)

1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google)
2. In MTKDroidstool (I assume you launch the tool) -- Click in Root.
3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE.
5. Then look for the folder where you extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone.
8. After hard reset your baseband should be fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI.
10. To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone. VOILA! I hope the phone is fully working :)

I hope this tutorial help you. Please drop a comment if something is not clear to you.

Tested by: ME

Go to link download

Saturday, October 15, 2016

Motorola Firmwares For RSD LITE Tools

Motorola Firmwares For RSD LITE Tools

RSD LITE 6.1.5 + MTK PATCH TOOL DOWNLOAD

A1000 firmware download

A835 firmware download

A840 firmware download

C115 firmware download

C116 firmware download

C155 firmware download

C350 firmware download

C350L firmware download

C380 firmware download

C390 firmware download

C450 firmware download

C550 firmware download

C650 firmware download

C698P firmware download

E1 ROKR. firmware download

E1070 firmware download

E2 ROKR firmware download

E365 firmware download

E398 firmware download

E770v firmware download

K1 KRZR firmware download

L2 firmware download

L6 firmware download

L6i firmware download

L7 SLVR firmware download

L7e SLVR firmware download

L9 MOTOSLVR firmware download

MPX200 firmware download

T720 firmware download

T720i firmware download

V3 RAZR firmware download

V300 firmware download

V3i RAZR D&G download

V3i RAZR download

V3r RAZR download

V3x RAZR download

V500 download

V547 download

W510 download

Z3 RIZR download

Z6 RIZR (ROKR Z6) download

Z8 MOTORIZR download

Sunday, October 2, 2016

Cherry Mobile Flare Lite Stock rom firmware to unbrick your phone

Cherry Mobile Flare Lite Stock rom firmware to unbrick your phone

Tuesday, September 13, 2016

Myphone Rio Lite Stock Rom Firmware to unbrick your phone

Myphone Rio Lite Stock Rom Firmware to unbrick your phone

Sunday, September 4, 2016

Cherry Mobile Flare S3 Lite firmware stock rom to unbrick your phone

Cherry Mobile Flare S3 Lite firmware stock rom to unbrick your phone

Monday, August 29, 2016

Hard Reset your Samsung Galaxy Fame Lite S6790 and remove password pattern lock and gmail account

Hard Reset your Samsung Galaxy Fame Lite S6790 and remove password pattern lock and gmail account

Friday, August 26, 2016

Star Mobile Up Lite firmware stock rom to unbrick your phone

Star Mobile Up Lite firmware stock rom to unbrick your phone