Fast Download

Unlock AT T USA Galaxy Rugby pro I547 LTE

AT&T USA Galaxy Rugby LTEOverview:
Galaxy Rugby Pro is waterproof for 30 minutes in up to three feet of water. The phone also is dustproof and shock resistant. And since its perfect for construction workers, its no surprise that the phone will support AT&Ts new enhanced PTT service which starts in November. The Galaxy Rugby Pro ftures a 4 inch WVGA screen and a 5MP rr-facing camera.




Unlock AT&T USA Galaxy Rugby pro I547 LTE
to use any where in the world with any supported service provider like

AT&T, Straight talk, T-mobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

at



You can request the by submitting your imei
@
http://www.WorldGSM.com




Your phone will also keep working with your current lock to service provider.
Take Your AT&T USA Galaxy Rugby LTEwith you on vaions and use the local service provider sim card in your phone and save roaming fees.


AT&T USA Galaxy Rugby LTE Instructions

1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the .
3: Insert the provided and press OK
4: Device is now unlocked.


*Not accepted sim card mn any other sim card other then your current locked to network



After AT&T USA Galaxy Rugby pro I547 LTE will work with



Also any where in the world with any Supported Carrier
*Supported carriers can vary based on your locked to carrier and your region, plse confirm with your service provider, before placing order

Your phone will be permanently Unlocked,it will not erase your contacts or any data from your phone.


Rsons to remote unlock your AT&T USA Galaxy Rugby LTE:

* If you are travelling, buy a local SIM card and save on roaming fees
* The resell value of AT&T USA Galaxy Rugby LTE will incrse significantly as it is available to more carriers.
* sily switch between SIM card, using the same phone.
* Unlock your phone from the comfort of your own home
* You never send your phone to anybody.
* There is absolutely no risk of damaging your AT&T USA Galaxy Rugby LTE by it.
* Very sy, no technical experience necessary.
* The phone is permanently unlocked, even after updates

Go to link download

Mega LTE GT I9205 ONLY with MODEM IMEI 0 SUCCESS REPAIRED BY OCTOPUS TIPS HERE!!

I9205 was in Bootloop, w/o EFS, w/o Imei itc.. flashed Custom Rom and phone NOT respond to Dial Command like *#0808#, *#9090# only MTP mode then ive used EFS PRO for take Out "Usb Diagnostic Port" and have repaired Imei with his ORIGINAL one, phone now is Working 100% 3G/4G/LTE, only any Tips and Repaired also NOT supported Yet for EFS Repair and many other option, HERE:


Quote: Welcome to Octoplus/Octopus Box software version 1.7.8
-----------------------------------------------------------------------------------
To connect GT-I9205 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build " 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" .
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" .
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Rd Info" in software.

TIPS: for take out DM+MODEM+ADB use EFS PRO and after Save EFS, NV, Security itc...
-----------------------------------------------------------------------------------
Platform: Android
Selected port: COM7
Selected model: GT-I9205
Rding info, plse wait...
ADB server killed.
Detected phone model: GT-I9205
Firmware compiled date: Mon May 12 21:29:25 IST 2014
PDA version: Unknown
CSC version: Unknown
SW version: I9205XXUDNE4
Phone IMEI: Unknown
Android version: 4.4.2 (KVT49L)
-----------------------------------------------------------------------------------
Platform: Android
Selected port: COM7
Selected model: GT-I9205
Mode: Normal
Phone model: GT-I9205
Firmware compiled date: Apr 09 2014
Firmware compiled time: 04:00:00
Firmware relsed date: May 22 2014
Firmware relsed time: 01:01:58
Incorrect IMEI
SW version: M8930B-AAAATAZM-3.2.27079
-----------------------------------------------------------------------------------
Platform: Android
Selected port: COM7
Selected model: GT-I9205
Mode: Normal
Phone model: GT-I9205
Firmware compiled date: Apr 09 2014
Firmware compiled time: 04:00:00
Firmware relsed date: May 22 2014
Firmware relsed time: 01:01:58
SW version: M8930B-AAAATAZM-3.2.27079
Old IMEI: 004400-15-202000-0
New IMEI: 3574xx-05-xxxxxx-9
Crting NVM backup
Rding NVM done!
Firmware compiled date: Mon May 12 21:29:25 IST 2014
PDA version: Unknown
CSC version: Unknown
SW version: I9205XXUDNE4
Phone IMEI: Unknown
Android version: 4.4.2 (KVT49L)
Cheking Root
Rding security backup, plse wait...
Backup saved as C:Program FilesOctoplusOctoplus_BACKUPSecurity-GT-I9205-16-12-2014_20-56-56-.asec file
Erasing old IMEI. It can take some time. Plse wait...
Phone will restart now. Plse dont disconnect cable!
Firmware compiled date: Apr 09 2014
Firmware compiled time: 04:00:00
Firmware relsed date: May 22 2014
Firmware relsed time: 01:01:58
SW version: M8930B-AAAATAZM-3.2.27079
Found phone on COM7
Repairing NVM for GT-I9205 phone...
IMEI successfully repaired.
To finish the operation, plse restart the phone via phones menu (dont disconnect the battery!)
HERE PHOTO for understand more good.
WARNING, if you have no knowledge about These advanced thinghs, im NOT RESPONSIBLE if you damage or BRICK / DD PHONE

Go to link download

How To Update Galaxy S 3 LTE 4 4 4 Software Full Solution Way Tutirial

Galaxy S 3 LTE 4.4.4 Software Update


DBT-I9305XXUFNI3-I9305DBTFNI3



Here goes what it says once you download the I9305XXUFNI3 4.4.4 update via over the air.
It has
OTA update
1. OS upgrade – [KitKat OS 4.4.4]
2. Music Album art will be displayed on the lock screen while playing music.
3. The new launcher setting menu has been added. – [Home Screen, SMS]
4. Camera shortcut is added in the Lock screen
5. User Interface and stability Improvements.
* Some changes may vary depending on country or network operator.
* After upgrading, you will NOT BE ABLE to downgrade to the old software because of updates to the security policy.
The changes of the Android 4.4.4 is similarly to Android 4.4.2 KitKat update but it has been added a lot more improvements particularly on user interface and system stability.
Technical Details of I9305XXUFNI3 4.4.4 Update

Device name: GALAXY S III
Model : GT-I9305
Android Version: 4.4.4
Baseband version: I9305XXUFNI3
Kernel version : 3.0.31 – 2760029 Fri Sept 12 13:08:24 KST 2014
Build KTU84P.I9305XXUFNI3

Grab the original 4.4.4 I9305XXUFNI3-I9305DBTFNI3 Stock ROM:

This is a unbranded firmware which is best for flashing ’cause its free from any carrier bloat and it’s compatible to all international Galaxy S3 LTE GT-I9305.

Germany – DBT-I9305XXUFNI3-I9305DBTFNI3 Download (Link)

Odin3_v3.07 ( here )

GT-I9305 USB Driver (here )


Procedures on Installing the I9305XXUFNI3 4.4.4 on Galaxy S3 LTE GT-I9305

1. Extract or unzip the downloaded I9305XXUFNI3 firmware or stock ROM so that you’ll get the Odin flashable tar.
2. Run Odin Downloader v3.09 flasher program.
3. Click on the AP button then browse to the folder where you extracted the stock ROM.
AP: I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3_HOME.tar.md 5?
4. Do Not check the Re-Partition check box. Mark check these check boxes Auto Reboot and F-Reset Time.
5. Reboot the phone in download mode: To reboot the Galaxy S3 into download mode , you need to turn the power off. After it completely shut down, just press and hold the Volume Down , Home button and the Power ON/OFF button simultaneously.
Galaxy S3 Download Mode buttons Volume Down+HOME+Power .


You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
6. Connect the phone to PC when it’s in the Download Mode screen.
7. Hit the “START’ button.
8. Wait until a word “PASS’ apprs.
9. Disconnect the phone from computer once completely reboots.
You may then confirm the newly installed Jelly Bn from your device:
About>Settings> Firmware info and see if it’s alrdy I9305XXUFNI3 4.4.4 Update.












Galaxy S 3 LTE 4.4.4 Software Update I9305 XXUFNI3 Download Now Free

Go to link download

Galaxy S 3 LTE 4 4 4 Software Update I9305 XXUFNI3 Download Now Free

Galaxy S 3 LTE 4.4.4 Software Update

DBT-I9305XXUFNI3-I9305DBTFNI3



Here goes what it says once you download the I9305XXUFNI3 4.4.4 update via over the air.
It has
OTA update
1. OS upgrade – [KitKat OS 4.4.4]
2. Music Album art will be displayed on the lock screen while playing music.
3. The new launcher setting menu has been added. – [Home Screen, SMS]
4. Camera shortcut is added in the Lock screen
5. User Interface and stability Improvements.
* Some changes may vary depending on country or network operator.
* After upgrading, you will NOT BE ABLE to downgrade to the old software because of updates to the security policy.
The changes of the Android 4.4.4 is similarly to Android 4.4.2 KitKat update but it has been added a lot more improvements particularly on user interface and system stability.
Technical Details of I9305XXUFNI3 4.4.4 Update

Device name: GALAXY S III
Model : GT-I9305
Android Version: 4.4.4
Baseband version: I9305XXUFNI3
Kernel version : 3.0.31 – 2760029 Fri Sept 12 13:08:24 KST 2014
Build KTU84P.I9305XXUFNI3

Grab the original 4.4.4 I9305XXUFNI3-I9305DBTFNI3 Stock ROM:

This is a unbranded firmware which is best for flashing ’cause its free from any carrier bloat and it’s compatible to all international Galaxy S3 LTE GT-I9305.

Germany – DBT-I9305XXUFNI3-I9305DBTFNI3 Download (Link)

Odin3_v3.07 ( here )

GT-I9305 USB Driver (here )


Procedures on Installing the I9305XXUFNI3 4.4.4 on Galaxy S3 LTE GT-I9305

1. Extract or unzip the downloaded I9305XXUFNI3 firmware or stock ROM so that you’ll get the Odin flashable tar.
2. Run Odin Downloader v3.09 flasher program.
3. Click on the AP button then browse to the folder where you extracted the stock ROM.
AP: I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3_HOME.tar.md 5?
4. Do Not check the Re-Partition check box. Mark check these check boxes Auto Reboot and F-Reset Time.
5. Reboot the phone in download mode: To reboot the Galaxy S3 into download mode , you need to turn the power off. After it completely shut down, just press and hold the Volume Down , Home button and the Power ON/OFF button simultaneously.
Galaxy S3 Download Mode buttons Volume Down+HOME+Power .


You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
6. Connect the phone to PC when it’s in the Download Mode screen.
7. Hit the “START’ button.
8. Wait until a word “PASS’ apprs.
9. Disconnect the phone from computer once completely reboots.
You may then confirm the newly installed Jelly Bn from your device:
About>Settings> Firmware info and see if it’s alrdy I9305XXUFNI3 4.4.4 Update.












.
How To Update Galaxy S 3 LTE 4.4.4 Software Full Solution Way Tutirial

Go to link download